{"product_id":"blackmagic-design-fairlight-console-channel-control","title":"Blackmagic Design Fairlight Console Channel Control","description":"\u003cdiv class=\"markdown markdown-main-panel stronger enable-updated-hr-color\" id=\"model-response-message-contentr_f93c2b85c27ac6b4\" aria-live=\"polite\" aria-busy=\"false\" dir=\"ltr\"\u003e\n\u003cp data-path-to-node=\"0\"\u003eThe \u003cb data-path-to-node=\"0\" data-index-in-node=\"4\"\u003eBlackmagic Design Fairlight Console Channel Control\u003c\/b\u003e is the high-density parameter module designed for modular Fairlight Studio Consoles. While the faders handle levels, this module provides the tactile interface for the \"deep\" processing in DaVinci Resolve, specifically for \u003cb data-path-to-node=\"0\" data-index-in-node=\"279\"\u003eEQ, Dynamics, Panning, and Plug-ins\u003c\/b\u003e.\u003c\/p\u003e\n\u003cp data-path-to-node=\"1\"\u003eIt consists of 12 groups of touch-sensitive rotary encoders and corresponding buttons, allowing it to act as either a wide controller for 12 channels or a deep controller for a single selected track.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"2\"\u003eOperational Modes\u003c\/h3\u003e\n\u003cp data-path-to-node=\"3\"\u003eThe module is highly adaptive and changes its layout based on the task:\u003c\/p\u003e\n\u003cul data-path-to-node=\"4\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"4,0,0\"\u003e\u003cb data-path-to-node=\"4,0,0\" data-index-in-node=\"0\"\u003eSingle Channel Mode:\u003c\/b\u003e All 12 encoder groups are mapped to one selected track. This allows you to see and adjust every band of EQ and every compressor setting simultaneously across the entire panel.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"4,1,0\"\u003e\u003cb data-path-to-node=\"4,1,0\" data-index-in-node=\"0\"\u003eIn-Line Mode:\u003c\/b\u003e Each of the 12 encoder groups controls a single parameter (like Pan or Gain) for the 12 channels currently mapped to the faders below.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"4,2,0\"\u003e\u003cb data-path-to-node=\"4,2,0\" data-index-in-node=\"0\"\u003eMaster Mode:\u003c\/b\u003e Maps parameters for the master bus and sub-mixes across the panel, following the signal chain from dynamics to final limiting.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"5\"\u003eKey Hardware Components\u003c\/h3\u003e\n\u003cul data-path-to-node=\"6\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"6,0,0\"\u003e\u003cb data-path-to-node=\"6,0,0\" data-index-in-node=\"0\"\u003eRotary Encoders:\u003c\/b\u003e 12 high-resolution, touch-sensitive knobs. Simply touching a knob can trigger automation \"write\" or reveal detailed parameter data on the console’s LCD monitors.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"6,1,0\"\u003e\u003cb data-path-to-node=\"6,1,0\" data-index-in-node=\"0\"\u003eFunction Buttons:\u003c\/b\u003e Each encoder group is paired with buttons for functions like \u003cb data-path-to-node=\"6,1,0\" data-index-in-node=\"79\"\u003eIn\u003c\/b\u003e (Bypass), \u003cb data-path-to-node=\"6,1,0\" data-index-in-node=\"92\"\u003eSelect\u003c\/b\u003e, and \u003cb data-path-to-node=\"6,1,0\" data-index-in-node=\"104\"\u003eCall\u003c\/b\u003e.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"6,2,0\"\u003e\u003cb data-path-to-node=\"6,2,0\" data-index-in-node=\"0\"\u003eTally Indicators:\u003c\/b\u003e Multi-color LEDs provide instant feedback on which processing blocks are active (e.g., Red for Dynamics, Magenta for EQ).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"7\"\u003eMaintenance and Common Issues\u003c\/h3\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003eEncoder Calibration:\u003c\/b\u003e If a knob feels \"jumpy\" or skips values, the internal optical sensor may need cleaning.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003eTouch Sensitivity Failure:\u003c\/b\u003e If the module stops recognizing when a knob is touched, it usually points to a grounding issue between the module and the console frame.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"0\"\u003eCommunication Errors:\u003c\/b\u003e Since the module communicates via Ethernet, \"offline\" errors are often resolved by checking the network switch in the console base or verifying the IP address in the DaVinci Resolve Video and Audio I\/O settings.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"9\"\u003eInstallation and Power\u003c\/h3\u003e\n\u003cul data-path-to-node=\"10\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"10,0,0\"\u003e\u003cb data-path-to-node=\"10,0,0\" data-index-in-node=\"0\"\u003eConnectivity:\u003c\/b\u003e Connects to the host workstation via a standard RJ45 Gigabit Ethernet port.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"10,1,0\"\u003e\u003cb data-path-to-node=\"10,1,0\" data-index-in-node=\"0\"\u003ePower:\u003c\/b\u003e Features an internal power supply with a standard IEC C14 input, allowing it to be powered directly from the console's internal power distribution.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"10,2,0\"\u003e\u003cb data-path-to-node=\"10,2,0\" data-index-in-node=\"0\"\u003eForm Factor:\u003c\/b\u003e Designed to \"drop in\" to the Fairlight Console Chassis and secure via underside mounting points.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"11\"\u003eDiagnostic Tip\u003c\/h3\u003e\n\u003cp data-path-to-node=\"12\"\u003eIf the module lights up but the knobs do not change parameters in DaVinci Resolve, verify that a track is \u003cb data-path-to-node=\"12\" data-index-in-node=\"106\"\u003eSelected (SEL)\u003c\/b\u003e on the Fader Module. The Channel Control module remains \"dormant\" until it has a specific track target to manipulate.\u003c\/p\u003e\n\u003c\/div\u003e","brand":"Blackmagic","offers":[{"title":"Default Title","offer_id":50842644316462,"sku":"BLA-DV\/RESFA\/EFCCS","price":54841.2,"currency_code":"ZAR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0801\/0157\/2910\/files\/Fairlight-Console-Channel-Control.jpg?v=1771401474","url":"https:\/\/shopvisuals.tv\/products\/blackmagic-design-fairlight-console-channel-control","provider":"ShopVisuals.tv","version":"1.0","type":"link"}