Welcome to our store Learn more

Up to 50% off on certain Certified Pre-Owned Broadcast Equipment

New collections added! Learn more

Broadcast Engineer standing by for queries.

SKU: BLA-SUPPLY-12V120WLOCK

Blackmagic Design Power Supply - ATEM Mini Extreme G2 120W

R 1,712.35
Tax included Shipping calculated at checkout.

The Blackmagic Design Power Supply - ATEM Mini Extreme G2 120W (Manufacturer SKU: SUPPLY-12V120WLOCK) is an OEM replacement external power brick engineered specifically to match the dramatic power expansion of the Generation 2 (G2) ATEM Mini Extreme switcher family.

While original first-generation ATEM Mini Extreme units shipped with a smaller 60W adapter, the upgraded G2 hardware—which introduces massive internal processing upgrades including Thunderbolt storage recording links, 10G high-speed Ethernet, and phantom-powered XLR inputs—demands a much larger ceiling of power overhead to maintain thermal stability.

Critical Technical Specifications

Parameter Specification
Output Voltage 12V DC (Direct Current)
Max Power Output 120 Watts
Max Current Delivery 10 Amps (10A x 12V= 12W)
Input Utility Compatibility 100V - 240V AC, 50/60 Hz universal input window
Connector Type Threaded Screw-Locking DC barrel ring barrel plug
Primary System Use-Case Standard replacement/spare brick for ATEM Mini Extreme ISO G2

Core Structural Features

  • Threaded Screw-Locking Mechanical Collar: Live production environments cannot afford a loose or snagged cable killing a multi-camera broadcast. The DC output barrel features a physical, free-spinning knurled locking ring. Once slotted into the back of the ATEM chassis, you spin the ring to mechanically lock the power cord to the camera panel thread.

  • Expanded Thermal Footprint: Because it continuously handles up to 10 Amps at full operational loads (such as when recording 8 channels of uncompressed ISO data directly onto external solid-state storage via Thunderbolt), the power brick is physically larger and insulated to safely dissipate heat over multi-hour production shoots.

Strict Backward Compatibility Cross-Check

⚠️ Over-Amperage vs. Voltage Safety: Because this brick regulates a strict 12V DC, it is technically safe to plug into smaller, legacy 12V ATEM switchers (like a standard 36W or 60W Extreme G1 unit). The device will only draw the amperage it requires. However, you should NEVER attempt to run a new ATEM Mini Extreme ISO G2 on an old 60W or 36W adapter—doing so will cause the older power supply to rapidly overheat, drop voltage under load, and cause the G2 switcher to randomly reboot or corrupt connected SSD drives midway through a live stream.

Blackmagic

Blackmagic Design Power Supply - ATEM Mini Extreme G2 120W

R 1,712.35

The Blackmagic Design Power Supply - ATEM Mini Extreme G2 120W (Manufacturer SKU: SUPPLY-12V120WLOCK) is an OEM replacement external power brick engineered specifically to match the dramatic power expansion of the Generation 2 (G2) ATEM Mini Extreme switcher family.

While original first-generation ATEM Mini Extreme units shipped with a smaller 60W adapter, the upgraded G2 hardware—which introduces massive internal processing upgrades including Thunderbolt storage recording links, 10G high-speed Ethernet, and phantom-powered XLR inputs—demands a much larger ceiling of power overhead to maintain thermal stability.

Critical Technical Specifications

Parameter Specification
Output Voltage 12V DC (Direct Current)
Max Power Output 120 Watts
Max Current Delivery 10 Amps (10A x 12V= 12W)
Input Utility Compatibility 100V - 240V AC, 50/60 Hz universal input window
Connector Type Threaded Screw-Locking DC barrel ring barrel plug
Primary System Use-Case Standard replacement/spare brick for ATEM Mini Extreme ISO G2

Core Structural Features

  • Threaded Screw-Locking Mechanical Collar: Live production environments cannot afford a loose or snagged cable killing a multi-camera broadcast. The DC output barrel features a physical, free-spinning knurled locking ring. Once slotted into the back of the ATEM chassis, you spin the ring to mechanically lock the power cord to the camera panel thread.

  • Expanded Thermal Footprint: Because it continuously handles up to 10 Amps at full operational loads (such as when recording 8 channels of uncompressed ISO data directly onto external solid-state storage via Thunderbolt), the power brick is physically larger and insulated to safely dissipate heat over multi-hour production shoots.

Strict Backward Compatibility Cross-Check

⚠️ Over-Amperage vs. Voltage Safety: Because this brick regulates a strict 12V DC, it is technically safe to plug into smaller, legacy 12V ATEM switchers (like a standard 36W or 60W Extreme G1 unit). The device will only draw the amperage it requires. However, you should NEVER attempt to run a new ATEM Mini Extreme ISO G2 on an old 60W or 36W adapter—doing so will cause the older power supply to rapidly overheat, drop voltage under load, and cause the G2 switcher to randomly reboot or corrupt connected SSD drives midway through a live stream.

View product
Back to top