Welcome to our store Learn more

New collections added! Learn more

Broadcast Engineer standing by for queries.

SKU: HOL-SOLSE-5S

Hollyland Solidcom SE-5S Wireless 5-Person Noise Cancelling Headset Intercom

R 18,654.15
Tax included Shipping calculated at checkout.


The Hollyland Solidcom SE-5S Global Wireless 5-Person Headset Intercom System is a lightweight, full-duplex communication network engineered for small-to-medium production crews, wedding filmmakers, and event staff. Operating on the ubiquitous 2.4 GHz frequency band, this decentralized, hub-free system strips away the baggage of traditional beltpacks and base stations. By embedding the transceiver electronics directly into the headset chassis, it delivers instantaneous, bidirectional conversation out of a highly portable, travel-ready footprint.

The specialized SE-5S designation notes a complete, factory-packaged deployment ecosystem containing one Master headset and four Remote headsets, configured out-of-the-box to unify a five-person team.


1. Advanced Dual-Mic Environmental Noise Cancellation (ENC)

The standout feature of the Solidcom SE series is its acoustic isolation layer, designed to handle noisy field conditions:

  • Dual-Microphone Intelligence: Each headset features a primary vocal microphone paired with a secondary ambient-sensing capsule on the outer ear cup. An internal DSP chip analyzes the differential timing between the two points, scrubbing away up to 20 dB of ambient distractions—such as roaring concert crowd noise, wind shears, and stage PA rumble.

  • Intelligible Dynamic Range: Boasting a high 71 dB Signal-to-Noise Ratio (SNR) and a localized vocal frequency response of 150 Hz to 7 kHz, the system focuses power on human vocal clarity. This ensures instructions are heard clearly without causing listening fatigue over long production shifts.

2. Full-Duplex Continuity over Adaptive Channels

  • Simultaneous Open Communication: Unlike traditional "push-to-talk" walkie-talkies that cut off incoming audio when a user speaks, the Solidcom SE operates in absolute Full-Duplex. Your team can speak and listen at the same time, maintaining a natural conversation flow that is essential for calling fast-paced live camera cues.

  • Line-of-Sight Transmission: Utilizing a GFSK wireless modulation scheme, the headsets deliver a steady, low-latency link across a 350-meter (1,100-foot) line-of-sight radius between headsets.

  • Auto Frequency Hopping: To withstand congested RF environments, the internal software continuously monitors the 2.4 GHz spectrum. If a local Wi-Fi router or video transmitter introduces interference, the system hops seamlessly to a clean frequency pathway behind the scenes without audio dropouts.

3. Ergonomic, Weather-Resistant Architecture

Weighing approximately 185 grams per headset (with battery included), the system is designed for comfort during long production days:

  • Reversible Monaural Layout: The single-ear, over-ear design lets team members monitor crystal-clear team communication while keeping their opposite ear completely open to perceive localized environmental cues on set. The microphone boom rotates a full 270 degrees, allowing it to be worn comfortably on either the left or right side.

  • Environmental Moisture Defenses: The internal PCB circuitry is treated with an anti-corrosion protective coating, rendering the hardware wind-resistant and splash-resistant. This gives teams peace of mind when operating in light rain, mist, or coastal maritime conditions.

  • Tactile Mechanical Mute Control: To mute your stream, simply flip the microphone boom upward. It locks with a definitive mechanical click at the vertical position, granting instant privacy. Dropping the boom back down restores your live channel in under a second. Additionally, a dedicated button on the ear cup supports traditional Push-to-Talk (PTT) workflows when desired.

4. Split Battery Architecture & Dual Charging Protocols

The master headset acts as the routing anchor for the system, drawing slightly more power than the remote units:

  • Asymmetric Power Delivery: Powered by removable HL-BAT770 Lithium-Ion cells, the system achieves up to 10 hours of continuous runtime on the Master headset, while the standard Remote headsets yield up to 12 hours of independent use.

  • Dual-Charging Architecture: The complete kit ships with a dedicated multi-slot external desktop charging base capable of replenishing dead cells in under 3 hours. However, for emergencies or continuous operation during marathon livestreams, each individual headset features an integrated USB-C port, allowing users to run the headset indefinitely while connected to an external power bank.


Technical Summary

  • User Configuration: 5-Person Fixed Network (1x Master Headset, 4x Remote Headsets). Note: The SE-5S variant utilizes a closed loop architecture and cannot be expanded past 5 users.

  • Wireless Protocol: Digital 2.4 GHz (GFSK Modulation / Hubless Peer-to-Peer topology).

  • Operational Range Limit: Up to 350 meters line-of-sight threshold.

  • Acoustic Metrics: Frequency response of 150 Hz to 7 kHz; Signal-to-Noise Ratio  71 dB; Max input handling of 115 dB SPL.

  • Active Noise Suppression: Dual-Mic ENC reducing more than 20 dB of omnidirectional ambient floor noise.

  • System Power Management: 770 mAh Li-ion battery core. Recharge duration 3 hours via USB-C or desktop dock.

  • Box Contents: 1x Master Single-Ear Headset, 4x Remote Single-Ear Headsets, 5x HL-BAT770 Rechargeable Batteries, 1x Multi-Slot Charging Base, 1x USB-A to USB-C Jumper Cable, Headset ID Number Stickers, Soft Storage/Carrying Case.

The Hollyland Solidcom SE-5S is an affordable, robust asset for production teams who want a simple, plug-and-play communication solution. It eliminates the hassle of managing beltpacks, handles loud shooting environments with ease, and provides clear, hands-free coordination for multi-camera video shoots, live streaming sets, and corporate event management.

Hollyland

Hollyland Solidcom SE-5S Wireless 5-Person Noise Cancelling Headset Intercom

R 18,654.15

The Hollyland Solidcom SE-5S Global Wireless 5-Person Headset Intercom System is a lightweight, full-duplex communication network engineered for small-to-medium production crews, wedding filmmakers, and event staff. Operating on the ubiquitous 2.4 GHz frequency band, this decentralized, hub-free system strips away the baggage of traditional beltpacks and base stations. By embedding the transceiver electronics directly into the headset chassis, it delivers instantaneous, bidirectional conversation out of a highly portable, travel-ready footprint.

The specialized SE-5S designation notes a complete, factory-packaged deployment ecosystem containing one Master headset and four Remote headsets, configured out-of-the-box to unify a five-person team.


1. Advanced Dual-Mic Environmental Noise Cancellation (ENC)

The standout feature of the Solidcom SE series is its acoustic isolation layer, designed to handle noisy field conditions:

  • Dual-Microphone Intelligence: Each headset features a primary vocal microphone paired with a secondary ambient-sensing capsule on the outer ear cup. An internal DSP chip analyzes the differential timing between the two points, scrubbing away up to 20 dB of ambient distractions—such as roaring concert crowd noise, wind shears, and stage PA rumble.

  • Intelligible Dynamic Range: Boasting a high 71 dB Signal-to-Noise Ratio (SNR) and a localized vocal frequency response of 150 Hz to 7 kHz, the system focuses power on human vocal clarity. This ensures instructions are heard clearly without causing listening fatigue over long production shifts.

2. Full-Duplex Continuity over Adaptive Channels

  • Simultaneous Open Communication: Unlike traditional "push-to-talk" walkie-talkies that cut off incoming audio when a user speaks, the Solidcom SE operates in absolute Full-Duplex. Your team can speak and listen at the same time, maintaining a natural conversation flow that is essential for calling fast-paced live camera cues.

  • Line-of-Sight Transmission: Utilizing a GFSK wireless modulation scheme, the headsets deliver a steady, low-latency link across a 350-meter (1,100-foot) line-of-sight radius between headsets.

  • Auto Frequency Hopping: To withstand congested RF environments, the internal software continuously monitors the 2.4 GHz spectrum. If a local Wi-Fi router or video transmitter introduces interference, the system hops seamlessly to a clean frequency pathway behind the scenes without audio dropouts.

3. Ergonomic, Weather-Resistant Architecture

Weighing approximately 185 grams per headset (with battery included), the system is designed for comfort during long production days:

  • Reversible Monaural Layout: The single-ear, over-ear design lets team members monitor crystal-clear team communication while keeping their opposite ear completely open to perceive localized environmental cues on set. The microphone boom rotates a full 270 degrees, allowing it to be worn comfortably on either the left or right side.

  • Environmental Moisture Defenses: The internal PCB circuitry is treated with an anti-corrosion protective coating, rendering the hardware wind-resistant and splash-resistant. This gives teams peace of mind when operating in light rain, mist, or coastal maritime conditions.

  • Tactile Mechanical Mute Control: To mute your stream, simply flip the microphone boom upward. It locks with a definitive mechanical click at the vertical position, granting instant privacy. Dropping the boom back down restores your live channel in under a second. Additionally, a dedicated button on the ear cup supports traditional Push-to-Talk (PTT) workflows when desired.

4. Split Battery Architecture & Dual Charging Protocols

The master headset acts as the routing anchor for the system, drawing slightly more power than the remote units:

  • Asymmetric Power Delivery: Powered by removable HL-BAT770 Lithium-Ion cells, the system achieves up to 10 hours of continuous runtime on the Master headset, while the standard Remote headsets yield up to 12 hours of independent use.

  • Dual-Charging Architecture: The complete kit ships with a dedicated multi-slot external desktop charging base capable of replenishing dead cells in under 3 hours. However, for emergencies or continuous operation during marathon livestreams, each individual headset features an integrated USB-C port, allowing users to run the headset indefinitely while connected to an external power bank.


Technical Summary

  • User Configuration: 5-Person Fixed Network (1x Master Headset, 4x Remote Headsets). Note: The SE-5S variant utilizes a closed loop architecture and cannot be expanded past 5 users.

  • Wireless Protocol: Digital 2.4 GHz (GFSK Modulation / Hubless Peer-to-Peer topology).

  • Operational Range Limit: Up to 350 meters line-of-sight threshold.

  • Acoustic Metrics: Frequency response of 150 Hz to 7 kHz; Signal-to-Noise Ratio  71 dB; Max input handling of 115 dB SPL.

  • Active Noise Suppression: Dual-Mic ENC reducing more than 20 dB of omnidirectional ambient floor noise.

  • System Power Management: 770 mAh Li-ion battery core. Recharge duration 3 hours via USB-C or desktop dock.

  • Box Contents: 1x Master Single-Ear Headset, 4x Remote Single-Ear Headsets, 5x HL-BAT770 Rechargeable Batteries, 1x Multi-Slot Charging Base, 1x USB-A to USB-C Jumper Cable, Headset ID Number Stickers, Soft Storage/Carrying Case.

The Hollyland Solidcom SE-5S is an affordable, robust asset for production teams who want a simple, plug-and-play communication solution. It eliminates the hassle of managing beltpacks, handles loud shooting environments with ease, and provides clear, hands-free coordination for multi-camera video shoots, live streaming sets, and corporate event management.

View product