Welcome to our store Learn more

Up to 50% off on certain Certified Pre-Owned Broadcast Equipment

New collections added! Learn more

Broadcast Engineer standing by for queries.

SKU: S-HOL-LBAT1500

Hollyland Spares - Li-ion Battery Pack (for SOLIDCOM M1 Beltpack)

R 1,794.00
Tax included Shipping calculated at checkout.

The Hollyland Li-ion Battery Pack for Solidcom M1 Beltpack (Model: HL-LBAT1500) is the official OEM replacement power cell engineered exclusively for the Solidcom M1 wireless intercom beltpacks.

Designed to support high-draw, professional communication workflows, this removable battery module ensures that live event crews, broadcast engineers, and production teams can seamlessly hot-swap power on the floor without taking their beltpacks out of service.

Key Performance & Design Features

  • Custom Removable Form Factor: Built as a rigid, compact block cartridge that slips into the dedicated internal cavity of the Solidcom M1 beltpack. The spring-loaded secure alignment pins lock the cell safely away under the beltpack's heavy-duty hatch.

  • Flexible In/Out Dual-Charging Protocol: The cell is designed to be charged in two distinct ways:

    1. Direct Docking: Left inside the Solidcom M1 beltpack frame when dropped onto the official multi-bay hardware charging base.

    2. Independent Slots: Slotted directly into the isolated battery charging tracks of the central M1 power station as an independent, naked cell.

  • Advanced Internal Safety IC: Integrates a built-in protective management system that regulates voltage thresholds. This layer defends the cell against localized overheating, short-circuit current loops, and extreme over-charging degradation.

Technical Specifications Matrix

Component Attribute Technical Specifications Detail
Official Model Designation HL-LBAT1500 (Also listed as S-HOL-LBAT1500)
System Interoperability Hollyland Solidcom M1 Wireless Beltpacks Only
Chemistry Material Lithium-Ion Polymer (Li-Polymer)
Nominal Voltage Profile 3.8V DC
Maximum Charging Voltage 4.35V DC
Total Energy Capacity 1500 mAh / 5.7 Wh
Average Full Run Duration Up to 6 Hours of continuous, active usage
Average Charging Cycle Time Approx. 2 to 2.5 Hours on the native M1 base station

On-Set Storage Optimization: To extend the functional lifespan of your replacement inventory, prevent these batteries from sitting inside deep-discharge states (0%) for extended periods when the system is not in use. When packing down your gear kit between gigs, charge your spare cells to roughly 40% to 50% capacity before moving them into your cases; this balances the internal cell pressure and preserves long-term chemistry capacity.

Hollyland

Hollyland Spares - Li-ion Battery Pack (for SOLIDCOM M1 Beltpack)

R 1,794.00

The Hollyland Li-ion Battery Pack for Solidcom M1 Beltpack (Model: HL-LBAT1500) is the official OEM replacement power cell engineered exclusively for the Solidcom M1 wireless intercom beltpacks.

Designed to support high-draw, professional communication workflows, this removable battery module ensures that live event crews, broadcast engineers, and production teams can seamlessly hot-swap power on the floor without taking their beltpacks out of service.

Key Performance & Design Features

  • Custom Removable Form Factor: Built as a rigid, compact block cartridge that slips into the dedicated internal cavity of the Solidcom M1 beltpack. The spring-loaded secure alignment pins lock the cell safely away under the beltpack's heavy-duty hatch.

  • Flexible In/Out Dual-Charging Protocol: The cell is designed to be charged in two distinct ways:

    1. Direct Docking: Left inside the Solidcom M1 beltpack frame when dropped onto the official multi-bay hardware charging base.

    2. Independent Slots: Slotted directly into the isolated battery charging tracks of the central M1 power station as an independent, naked cell.

  • Advanced Internal Safety IC: Integrates a built-in protective management system that regulates voltage thresholds. This layer defends the cell against localized overheating, short-circuit current loops, and extreme over-charging degradation.

Technical Specifications Matrix

Component Attribute Technical Specifications Detail
Official Model Designation HL-LBAT1500 (Also listed as S-HOL-LBAT1500)
System Interoperability Hollyland Solidcom M1 Wireless Beltpacks Only
Chemistry Material Lithium-Ion Polymer (Li-Polymer)
Nominal Voltage Profile 3.8V DC
Maximum Charging Voltage 4.35V DC
Total Energy Capacity 1500 mAh / 5.7 Wh
Average Full Run Duration Up to 6 Hours of continuous, active usage
Average Charging Cycle Time Approx. 2 to 2.5 Hours on the native M1 base station

On-Set Storage Optimization: To extend the functional lifespan of your replacement inventory, prevent these batteries from sitting inside deep-discharge states (0%) for extended periods when the system is not in use. When packing down your gear kit between gigs, charge your spare cells to roughly 40% to 50% capacity before moving them into your cases; this balances the internal cell pressure and preserves long-term chemistry capacity.

View product
Back to top