Welcome to our store Learn more

Up to 50% off on certain Certified Pre-Owned Broadcast Equipment

New collections added! Learn more

AFFORDABLE BLACKMAGIC EQUIPMENT. Broadcast Engineer standing by for queries.

1 6
SKU: LIB-RC-70

Libec Tripod case compatible with RSP-750

R 9,656.55
Tax included Shipping calculated at checkout.

The official tripod case designed for the Libec RSP-750 system (including its aluminum and carbon fiber configurations, like the RSP-750M and RSP-750MC) is the Libec RC-70 All-Round Tripod Case.

While the larger RSP-850 system uses the longer RC-80, the RC-70 is engineered with a slightly more compact profile tailored to fit the dimensions of the RHP75 head paired with RT50B or RT50C tripod legs.

Key Features of the RC-70 Case

  • Flight-Ready Protection: The case features a rigid, molded layout lined with heavy-duty padding and internal hard-shell armor plates. This structural design shields the delicate fluid modules and pan-tilt dials of the RHP75 head from heavy impacts during airline check-in or equipment truck transport.

  • Heavy-Duty Wheel Transport: It is equipped with two rugged, low-profile undercarriage wheels and a reinforced top pull-handle. This allows operators to roll a fully loaded, 17-pound tripod setup through airports, parking lots, or studio stages without physical strain.

  • Internal Tie-Down Anchors: Built-in adjustable inner straps secure the tripod legs and fluid head tightly against the spine of the case, preventing the equipment from shifting, rattling, or sustaining scratches during transit.

  • Dedicated Zippered Pocket: Features a clear, zippered internal accessory compartment built into the lid, making it easy to store pan bars (like the PH-8B), camera slide plates, tie-down knobs, or lens tools.

Technical Specifications:

Parameter Libec RC-70 Factory Specifications
Official Model SKU RC-70
Internal Length Dimensions 91.5 cm / 36.0 inches
Internal Width/Depth 20.0 cm $\times$ 18.0 cm / 7.9" $\times$ 7.1"
Empty Weight 3.7 kg / 8.1 lbs
Primary Structural Material Water-resistant High-Density Nylon with Rigid Inserts
Native System Pairing Libec RSP-750 series (RSP-750, RSP-750M, RSP-750MC)
Stand-Alone Component Fit Fits T102B, RT30B, RT40RB, RT50B, and RT50C leg assemblies

Alternative Choice for Maximum Payload Storage:

If you frequently travel with your RHP75 fluid head detached from the legs, or if you prefer to leave bulky optional accessories (like dual long pan bars, extra camera plates, and large mid-level spreaders) permanently mounted to the tripod inside the case, you can step up to the Libec RC-80. The RC-80 offers the exact same heavy-duty rolling protection but increases the internal length clearance to 107 cm (42"), giving you plenty of extra breathing room.

Libec

Libec Tripod case compatible with RSP-750

R 9,656.55

The official tripod case designed for the Libec RSP-750 system (including its aluminum and carbon fiber configurations, like the RSP-750M and RSP-750MC) is the Libec RC-70 All-Round Tripod Case.

While the larger RSP-850 system uses the longer RC-80, the RC-70 is engineered with a slightly more compact profile tailored to fit the dimensions of the RHP75 head paired with RT50B or RT50C tripod legs.

Key Features of the RC-70 Case

  • Flight-Ready Protection: The case features a rigid, molded layout lined with heavy-duty padding and internal hard-shell armor plates. This structural design shields the delicate fluid modules and pan-tilt dials of the RHP75 head from heavy impacts during airline check-in or equipment truck transport.

  • Heavy-Duty Wheel Transport: It is equipped with two rugged, low-profile undercarriage wheels and a reinforced top pull-handle. This allows operators to roll a fully loaded, 17-pound tripod setup through airports, parking lots, or studio stages without physical strain.

  • Internal Tie-Down Anchors: Built-in adjustable inner straps secure the tripod legs and fluid head tightly against the spine of the case, preventing the equipment from shifting, rattling, or sustaining scratches during transit.

  • Dedicated Zippered Pocket: Features a clear, zippered internal accessory compartment built into the lid, making it easy to store pan bars (like the PH-8B), camera slide plates, tie-down knobs, or lens tools.

Technical Specifications:

Parameter Libec RC-70 Factory Specifications
Official Model SKU RC-70
Internal Length Dimensions 91.5 cm / 36.0 inches
Internal Width/Depth 20.0 cm $\times$ 18.0 cm / 7.9" $\times$ 7.1"
Empty Weight 3.7 kg / 8.1 lbs
Primary Structural Material Water-resistant High-Density Nylon with Rigid Inserts
Native System Pairing Libec RSP-750 series (RSP-750, RSP-750M, RSP-750MC)
Stand-Alone Component Fit Fits T102B, RT30B, RT40RB, RT50B, and RT50C leg assemblies

Alternative Choice for Maximum Payload Storage:

If you frequently travel with your RHP75 fluid head detached from the legs, or if you prefer to leave bulky optional accessories (like dual long pan bars, extra camera plates, and large mid-level spreaders) permanently mounted to the tripod inside the case, you can step up to the Libec RC-80. The RC-80 offers the exact same heavy-duty rolling protection but increases the internal length clearance to 107 cm (42"), giving you plenty of extra breathing room.

View product
Back to top