Welcome to our store Learn more

Up to 50% off on certain Certified Pre-Owned Broadcast Equipment

New collections added! Learn more

Broadcast Engineer standing by for queries.

1 7
SKU: SEN-700278

Sennheiser Profile Wireless 1-Channel Set

R 5,748.85
Tax included Shipping calculated at checkout.

The Sennheiser Profile Wireless 1-Channel Set is a premium, compact digital wireless clip-on microphone system tailored specifically for solo content creators, vloggers, and mobile journalists.

Operating on the globally license-free 2.4 GHz digital frequency spectrum, this system scales down the footprint and cost of Sennheiser’s acclaimed dual-channel Profile setup. It strips away the heavy multi-unit charging bar/handheld sleeve and replaces it with a streamlined, ultra-portable setup configured for an individual on-camera speaker.

Key Acoustic and Fail-Safe Architecture

  • "No-Clip" 32-Bit Float Recording: The single clip-on microphone transmitter houses 16 GB of internal flash storage, capable of saving up to 30 hours of high-resolution backup audio. Crucially, it records in 32-bit float / 48 kHz. If your speaker suddenly screams or an unexpected noise spikes the audio, the massive dynamic range means you can perfectly recover clipped waveforms in post-production.

  • Intelligent Backup Modes: The system features a Backup Recording Mode that monitors signal integrity. If the 2.4 GHz connection gets blocked by structural walls or heavy Wi-Fi traffic, the microphone automatically starts local recording on the spot.

  • Dual-Channel Receiver with Room to Grow: Even though this is a 1-Channel box set, the included touchscreen receiver is natively dual-channel. If your production needs expand, you do not need to buy a whole new receiver—you can buy a standalone second Profile Wireless transmitter later and pair it instantly.

Technical Specifications Matrix

Feature Parameter Hardware Specification Profile
System Profile Configuration 1-Person Wireless Clip-On Mic & Recorder System
RF Carrier Frequency Band 2.4 GHz ISM Band (2400 MHz – 2483.5 MHz / License-Free)
Transmission Range Up to 245 meters (800 feet) clear Line-of-Sight
Microphone Transducer Type Integrated Omnidirectional Pre-polarized Condenser
Maximum Sound Pressure Level 113 dB SPL
Frequency Response Range 60 Hz – 20,000 Hz (110 Hz low-cut filter assignable)
Internal Safety Modes Safety Channel Mode (-6 dB output allocation) / 32-bit Float
Receiver Display Layout Touchscreen OLED with an automatic Gyro-Orientation Sensor
Hardware Latency Ceiling Ultra-low < 8ms
Continuous Battery Runtime Up to 7 hours (simultaneous transmitting and recording)
Physical Input (Transmitter) 3.5mm TRS locking mini-jack with plug-in power (for Lavaliers)
Physical Outputs (Receiver) 3.5mm TRS Camera Out, 3.5mm Headphone Jack, USB-C Audio

Out-of-the-Box Hardware Versatility

The system bypasses the need for proprietary control apps. Sennheiser bundles interchangeable, slide-on slot adapters directly with the receiver so you can switch your target audio host instantly:

  • The DSLR/Mirrorless Setup: Slide on the cold-shoe adapter and connect the bundled 3.5mm coiled TRS-to-TRS cable directly into your camera’s microphone preamp port.

  • The Mobile Smartphone Setup: Snap the USB-C or Lightning structural pins directly onto the base of the receiver to mount and feed digital audio straight into an iPhone, iPad, or Android device.

Pro-Audio Deployment Tips

⚠️ Mind the Gyro Sensor: The receiver features an integrated gyro sensor that automatically flips the display 180 degrees so it's always right-side up, regardless of how it's mounted. If you notice your screen spinning unexpectedly when handling the camera cage, you can hard-lock the display orientation into a fixed direction through the receiver’s hardware settings menu.

Lavalier Security: The 3.5mm input jack on the clip-on transmitter features a dedicated internal thread collar. If you decide to plug in an external lapel mic (like a Sennheiser ME 2), make sure to thread the locking collar down all the way to keep the line completely secure from getting yanked loose during active shoots.

 

 

Sennheiser

Sennheiser Profile Wireless 1-Channel Set

R 5,748.85

The Sennheiser Profile Wireless 1-Channel Set is a premium, compact digital wireless clip-on microphone system tailored specifically for solo content creators, vloggers, and mobile journalists.

Operating on the globally license-free 2.4 GHz digital frequency spectrum, this system scales down the footprint and cost of Sennheiser’s acclaimed dual-channel Profile setup. It strips away the heavy multi-unit charging bar/handheld sleeve and replaces it with a streamlined, ultra-portable setup configured for an individual on-camera speaker.

Key Acoustic and Fail-Safe Architecture

  • "No-Clip" 32-Bit Float Recording: The single clip-on microphone transmitter houses 16 GB of internal flash storage, capable of saving up to 30 hours of high-resolution backup audio. Crucially, it records in 32-bit float / 48 kHz. If your speaker suddenly screams or an unexpected noise spikes the audio, the massive dynamic range means you can perfectly recover clipped waveforms in post-production.

  • Intelligent Backup Modes: The system features a Backup Recording Mode that monitors signal integrity. If the 2.4 GHz connection gets blocked by structural walls or heavy Wi-Fi traffic, the microphone automatically starts local recording on the spot.

  • Dual-Channel Receiver with Room to Grow: Even though this is a 1-Channel box set, the included touchscreen receiver is natively dual-channel. If your production needs expand, you do not need to buy a whole new receiver—you can buy a standalone second Profile Wireless transmitter later and pair it instantly.

Technical Specifications Matrix

Feature Parameter Hardware Specification Profile
System Profile Configuration 1-Person Wireless Clip-On Mic & Recorder System
RF Carrier Frequency Band 2.4 GHz ISM Band (2400 MHz – 2483.5 MHz / License-Free)
Transmission Range Up to 245 meters (800 feet) clear Line-of-Sight
Microphone Transducer Type Integrated Omnidirectional Pre-polarized Condenser
Maximum Sound Pressure Level 113 dB SPL
Frequency Response Range 60 Hz – 20,000 Hz (110 Hz low-cut filter assignable)
Internal Safety Modes Safety Channel Mode (-6 dB output allocation) / 32-bit Float
Receiver Display Layout Touchscreen OLED with an automatic Gyro-Orientation Sensor
Hardware Latency Ceiling Ultra-low < 8ms
Continuous Battery Runtime Up to 7 hours (simultaneous transmitting and recording)
Physical Input (Transmitter) 3.5mm TRS locking mini-jack with plug-in power (for Lavaliers)
Physical Outputs (Receiver) 3.5mm TRS Camera Out, 3.5mm Headphone Jack, USB-C Audio

Out-of-the-Box Hardware Versatility

The system bypasses the need for proprietary control apps. Sennheiser bundles interchangeable, slide-on slot adapters directly with the receiver so you can switch your target audio host instantly:

  • The DSLR/Mirrorless Setup: Slide on the cold-shoe adapter and connect the bundled 3.5mm coiled TRS-to-TRS cable directly into your camera’s microphone preamp port.

  • The Mobile Smartphone Setup: Snap the USB-C or Lightning structural pins directly onto the base of the receiver to mount and feed digital audio straight into an iPhone, iPad, or Android device.

Pro-Audio Deployment Tips

⚠️ Mind the Gyro Sensor: The receiver features an integrated gyro sensor that automatically flips the display 180 degrees so it's always right-side up, regardless of how it's mounted. If you notice your screen spinning unexpectedly when handling the camera cage, you can hard-lock the display orientation into a fixed direction through the receiver’s hardware settings menu.

Lavalier Security: The 3.5mm input jack on the clip-on transmitter features a dedicated internal thread collar. If you decide to plug in an external lapel mic (like a Sennheiser ME 2), make sure to thread the locking collar down all the way to keep the line completely secure from getting yanked loose during active shoots.

 

 

View product
Back to top