Sennheiser SPECTERA SEK BELT CLIP Belt clip for SPECTERA Bodypack
Sennheiser SPECTERA SEK BELT CLIP Belt clip for SPECTERA Bodypack is backordered and will ship as soon as it is back in stock.
Couldn't load pickup availability
Sennheiser Spectera SEK Belt Clip
The Sennheiser Spectera SEK Belt Clip (Article Number: 700071) is a rugged, exchangeable structural metal clip component designed explicitly for the groundbreaking Sennheiser Spectera SEK bidirectional wireless bodypack. This specific part serves as a direct original equipment manufacturer (OEM) replacement or maintenance accessory, restoring secure clip performance if the original component is lost or damaged during demanding live productions.
Because the Spectera SEK bodypack acts simultaneously as a transmitter for microphone/line levels and a receiver for in-ear monitoring (IEM) audio over a single wireless carrier, keeping the hardware safely fastened to a performer or speaker is absolutely vital to avoid breaking multi-channel signal loops.
Key Architectural and Functional Attributes
Exchangeable Vertical Alignment: The hardware uses a heavy-duty vertical orientation profile, mounting flush against the back of the metal bodypack chassis. This allows the unit to slide cleanly onto belts, guitar straps, waistbands, or heavy costuming elements.
Reversible Ambidextrous Orientation: To accommodate different stage layouts, actor preferences, or costuming configurations, the belt clip can be fully detached and flipped over. This enables the user to position the bodypack upside down or right side up based on cable strain relief needs.
Spring-Steel Metal Composition: Formed from high-tensile spring steel, the clip retains its original clamping force even after hundreds of flex cycles, ensuring the bodypack remains anchored during rapid physical motion, running, or energetic live concert routines.
Technical Specifications Matrix
| Feature Parameter | Hardware Specification Value |
| Model Reference Name | SPECTERA SEK BELT CLIP |
| Official Article Number | 700071 |
| Master Ecosystem Compatibility | Sennheiser Spectera SEK Bodypack Only |
| Material of Construction | Heavy-duty spring steel metal |
| Mounting Layout Profile | Exchangeable vertical design |
| Universal Product Code (UPC) | 615104377912 |
| Intended Operational Focus | Replacement clip / Field maintenance part |
Installation and Hardware Care Guidance
How to Safely Remove the Clip: To prevent warping the metal alignment pins, avoid pulling both sides of the clip outward at the exact same time. Instead, hold down the center of the belt clip firmly with your thumb against the bodypack housing. Use your other hand to carefully pull back and out on just one side of the clip arm until it pops clear of its tracking channel. While maintaining thumb pressure, safely guide the remaining side out of its anchor slot.
How to Safely Insert the Clip: Hold down the clip body with your thumb against the unit frame. Always insert one side pin into its targeted structural mounting point first. Once the first side is locked into the channel track, push the opposite pin down and guide it straight into the second side slot. Following this sequence prevents the spring-steel layout from bending unevenly.
